NEW SOLUTION FROM ARMSTRONG HAS BIG BENEFITS FOR PROPERTY
DEVELOPERS AND LANDLORDS
 A
new solution for space heating and hot water developed by Armstrong
can prevent many of the problems currently experienced by UK
landlords, property developers and contractors.
The new Armstrong Tenantherm provides energy efficient heating and
hot water for apartments and community heating schemes, and can
prevent a myriad of problems such as access to individual flats,
unsightly or costly flue systems, high running and maintenance
costs, risks of Legionella, and problems of lime scale formation.
Instead of requiring individual gas boilers and cylinders to be
installed in each flat, Tenantherm is a compact, easy to install,
fully integrated thermal interface unit which provides highly
efficient heating and hot water from a centralised heat source, but
with individual control available in each apartment. And, as the
central boilers will always operate in condensing mode, it offers
maximum efficiency and lower running costs.
Tenantherm is pre-assembled and tested for quick trouble-free
installation and couples with Armstrong’s MBS heating solution to
provide a complete off-site manufactured system which arrives at
site requiring only final connection. Units can be housed in a white
powder-coated steel cabinet, or supplied chassis mounted for
installation in ducts or pipe riser cupboards. As the system is
fully-assembled in Armstrong’s own factory, installation can be
achieved simply with semi-skilled labour rather than requiring
registered CORGI or G3 personnel. Designed specifically for the UK,
it has controls that are simple and straightforward to understand
for installers.
Tenantherm gives each resident the benefit of individual controls to
select the temperature and time settings that suit their lifestyle.
But this level of tenant control is made possible without the
problems this traditionally brings for the landlord or property
management company. As the heating source is centralised, mandatory
annual inspections can be carried out whenever required, without the
problems of gaining access to individual flats. In situations where
tenants are frequently unavailable, or even uncooperative in
allowing access, this can save the landlord considerable time,
effort and cost.
The system also offers the landlord a great deal of flexibility for
metering. Energy and/or water usage can be metered in each thermal
interface unit, with meters positioned inside the units for ease of
installation. There are a range of meter reading options including
manual, optical, radio reader or centralised/BMS reading using
M-bus.
The absence of a boiler in each apartment frees up space for the
tenant and prevents the need for an unsightly flue or, for the
landlord, the necessity for a costly flue manifold system.
Maintenance costs are much reduced and there is a greater
opportunity to meet demand in situations where combination boilers
can struggle. As Tenantherm is able to continuously provide 12, 15
or 17 litres per minute at 40 degrees C temperature rise, ample hot
water is always available without the additional capital costs and
inspection responsibilities of unvented hot water cylinders. As
there is no need for stored water in a system of this type, the risk
of Legionella is eliminated and, as the central boilers operate at
lower operating temperatures there is reduced risk of lime scale
formation in hard water areas.
Tenantherm also has major advantages in terms of energy efficiency.
The super-efficient MBS optimises the energy saving features of
variable speed drive pumps, the latest microprocessor control and
fully integrated condensing boiler technology. The energy
requirement is therefore 15 to 20% less than that of individual
boilers without any detriment to tenant comfort. Tenantherm also
integrates with renewables such as solar thermal, heat pumps and
biomass to help achieve a low carbon footprint and optimum SAP
ratings.
Steve Cooper of Armstrong explained, “The regulatory framework for
residential letting and community housing schemes now places a
growing burden on landlords and property management companies,
particularly in areas such as gaining access from tenants for
inspections. This can waste significant time and resources for the
landlord without providing any corresponding increase in revenue.
Tenantherm provides a better solution by putting overall control of
the heating and hot water equipment back in the hands of the
landlord, but ensures tenants are happy by giving them complete
control over their own temperatures and settings. And, as the system
is pre-designed, pre-assembled and pre-tested, it is less hassle
from the word go.”
Email: NEW SOLUTION FROM ARMSTRONG HAS BIG BENEFITS FOR PROPERTY
DEVELOPERS AND LANDLORDS
A new solution for space heating and hot water developed by
Armstrong can prevent many of the problems currently experienced by
UK landlords, property developers and contractors.
The new Armstrong Tenantherm provides energy efficient heating and
hot water for apartments and community heating schemes, and can
prevent a myriad of problems such as access to individual flats,
unsightly or costly flue systems, high running and maintenance
costs, risks of Legionella, and problems of lime scale formation.
Instead of requiring individual gas boilers and cylinders to be
installed in each flat, Tenantherm is a compact, easy to install,
fully integrated thermal interface unit which provides highly
efficient heating and hot water from a centralised heat source, but
with individual control available in each apartment. And, as the
central boilers will always operate in condensing mode, it offers
maximum efficiency and lower running costs.
Tenantherm is pre-assembled and tested for quick trouble-free
installation and couples with Armstrong’s MBS heating solution to
provide a complete off-site manufactured system which arrives at
site requiring only final connection. Units can be housed in a white
powder-coated steel cabinet, or supplied chassis mounted for
installation in ducts or pipe riser cupboards. As the system is
fully-assembled in Armstrong’s own factory, installation can be
achieved simply with semi-skilled labour rather than requiring
registered CORGI or G3 personnel. Designed specifically for the UK,
it has controls that are simple and straightforward to understand
for installers.
Tenantherm gives each resident the benefit of individual controls to
select the temperature and time settings that suit their lifestyle.
But this level of tenant control is made possible without the
problems this traditionally brings for the landlord or property
management company. As the heating source is centralised, mandatory
annual inspections can be carried out whenever required, without the
problems of gaining access to individual flats. In situations where
tenants are frequently unavailable, or even uncooperative in
allowing access, this can save the landlord considerable time,
effort and cost.
The system also offers the landlord a great deal of flexibility for
metering. Energy and/or water usage can be metered in each thermal
interface unit, with meters positioned inside the units for ease of
installation. There are a range of meter reading options including
manual, optical, radio reader or centralised/BMS reading using
M-bus.
The absence of a boiler in each apartment frees up space for the
tenant and prevents the need for an unsightly flue or, for the
landlord, the necessity for a costly flue manifold system.
Maintenance costs are much reduced and there is a greater
opportunity to meet demand in situations where combination boilers
can struggle. As Tenantherm is able to continuously provide 12, 15
or 17 litres per minute at 40 degrees C temperature rise, ample hot
water is always available without the additional capital costs and
inspection responsibilities of unvented hot water cylinders. As
there is no need for stored water in a system of this type, the risk
of Legionella is eliminated and, as the central boilers operate at
lower operating temperatures there is reduced risk of lime scale
formation in hard water areas.
Tenantherm also has major advantages in terms of energy efficiency.
The super-efficient MBS optimises the energy saving features of
variable speed drive pumps, the latest microprocessor control and
fully integrated condensing boiler technology. The energy
requirement is therefore 15 to 20% less than that of individual
boilers without any detriment to tenant comfort. Tenantherm also
integrates with renewables such as solar thermal, heat pumps and
biomass to help achieve a low carbon footprint and optimum SAP
ratings.
Steve Cooper of Armstrong explained, “The regulatory framework for
residential letting and community housing schemes now places a
growing burden on landlords and property management companies,
particularly in areas such as gaining access from tenants for
inspections. This can waste significant time and resources for the
landlord without providing any corresponding increase in revenue.
Tenantherm provides a better solution by putting overall control of
the heating and hot water equipment back in the hands of the
landlord, but ensures tenants are happy by giving them complete
control over their own temperatures and settings. And, as the system
is pre-designed, pre-assembled and pre-tested, it is less hassle
from the word go.”
Email:
Lhousepr@btinternet.com
T.I. Dynamic Facades Rainscreen-cladding-systems News 160608
Homes for Scotland Planning, development and architecture News 160608
Cembrit Cladding products Corrugated Sheets News 160608
Cundall Multidisciplinary engineering practice News 160608
National Energy Foundation Sustainable energy sources charity News 160608
ARVAL
Insulated Roof and Wall Systems News 160608
Bachy Soletanche Limited Geotechnical Specialists Structural Retaining Walls
News 160608
Cablofil Steel
wire cable tray News 160608
DORMA Door Hardware Glass Systems and Fittings News 160608
Dow Building Solutions Extruded polystyrene foam insulation News 160608
Gleeds Management and Construction Consultancy News 160608
Tees Valley Regeneration Regeneration, planning and development News 160608
Marley Eternit Roofing Clay Tiles Concerete Tiles News 160608
Mita Energy management
news 160608
Monodraught Natural Daylighting Sundomes Natural Ventilation News 160608
MORGAN
LOVELL Office interior design News 160608
SURGO Construction Independent building contractors News 160608
Ibstock Clay
facing bricks News 160608
Ward Insulated Panels Metal Roof Cladding Systems News 160608
West Yorkshire Built In Quality Awards 2008 Construction Awards Ceremony News
160608
Danfoss Invertor Drives Controls Motors News 170608
Eaton Electric Limited Electrical Accessories Busbars News 170608
Eaton Electric Limited Busbars Electrical Accessories News 170608
ARDEX UK Screeds Renders Ceramic Adhesives Grouts News 170608
SSQ Roofing Slates
Tiles News 170608
Leaderflush Shapland Doors External Doors Internal News 170608
Mitsubishi Electric Combined Heat and Power News 170608
Pinelog Limited Leisure complex developers News 170608
Sarnafil Single ply roofing membranes News 170608
Weyerhaeuser Forest products Interior furniture News 170608
Calorex Heat Pumps News
170608
Costain Highways Engineering and construction group News 170608
Greenled
Light LED light technology News 180608
ATEC Security Security and communications systems integrator News 180608
M40 Architectural Tiles Ltd Architectural tiles News 180608
HardieBacker Fibre cement building products News 180608
Tarpaflex Ltd
Tarpaulins News 180608
Polyflor Ltd Sports Surfaces Safety Flooring News 180608
Brett Landscaping and Building Products Landscaping and Building Products News
180608
ARDEX UK Screeds Renders Ceramic Adhesives Grouts News 180608
Tyco Themal Controls Underfloor Heating Electrical Underfloor Heating News
180608
Bosch Security Systems Security and Surveillance Technology News 180608
Marshall-Tufflex Cable Trays Ladders Datatray News 180608
Marshall-Tufflex Cable Trays Ladders Datatray News 180608-2
HIPPOWASTE™
Waste management firm News 180608
Smedegaard Pumps News 180608
BLUCHER UK LTD Drainage Underground pipesducting News 180608
Colt International Car Park Ventilation Heat Pumps News 180608
ISG Jackson Construction Services Specialists New Builds News 180608
International Hard Anodising Association Technical Symposium News 180608
Kronospan
Wood-based panels News 190608
Timber Window Accreditation Windows and glazing systems News 190608
Kingspan Off-Site Timber Frame Systems Engineered Flooring news 190608
Chartered Institute Of Building Building Control and Standards News 190608
JC
Wilkins Acoustic insulation solutions News 190608
Pinelog Design, planning and development News 190608
Stannah Lifts Lifts Goods-only lifts Micro Lifts News 190608
ISG Jackson Construction Services Specialists New Builds News 190608
Burlington Slate Natural stone products News 190608
HLM Architects Architecture, planning and design News 190608
Mitsubishi Electric Air conditioning systems News 190608
Gleeds Management and Construction Consultants News 200608
STROMA Training for Code for Sustainable Homes News 200608
Chartered Institute Of Building Building Control and Standards News 200608
Forward Vision Security and surveillance News 200608
Portakabin Modular building supplier News 200608
Weatherite Shopfronts and Shutters Limited Aliminum Shopfronts Complete Entrance
Facades News 200608
Copal Group's Sheet leadwork and flashings News 200608
B & K Timber Structures Timber design and manufacture News 200608
UKTradeStreet Tradesmen Directory News 200608
Saint-Gobain Ductile iron pipes Drainage systems News 200608
DORMA Doors
and Door Accessories News 200608
Armstrong Boilers Packaged Pumps Pump Systems News 200608
Polypipe Terrain Above ground drainage News 200608
The Solar Trade Association Solar thermal industry News 200608
EuroFox
Facade technology solutions News 200608
H+H Aircrete products
News 230608
Guttermaster Aluminium rainwater systems News 230608
British Gypsum Plaster Plasterboard and Drylining Systems News 230608
Screwfix Trade
Manufacturers News 230608
Cavity Insulation Guarantee Agency National Insulation Association News 230608
International Congress Congress On Concrete News 230608
EPIC Centre Sustainable Living Exhibition News 230608
British Gypsum Plaster Plasterboard and Drylining Systems News 230608-2
Sound Service (Oxford) Noise Control Insulated Panels News 230608
Greenled LED
light technology News 230608
CDM2007.org Modular on-line CDM2007 training News 230608
Miller Construction Housebuilding Property development Construction businesses
News 230608
Trafalgar Square Demonstration Construction Undulating 200 foot long wooden wall
News 240608
CMS Vibrations Anti-vibration Structural isolation News 240608
Independent Access lifts Vertical platform lifts News 240608
Polyflor Sports Surfaces Safety Flooring News 240608
Tarkett Fully Flexible Sheet and Tiles News 240608
The Deptford Project The Deptford Project café News 240608
Wilo
Rainwater harvesting system News 250608
London Festival of Architecture Festival of Architecture News 250608
Powerminster Gleeson Services Power Providers News 250608
Carbon
Trust Carbon Trust Standard News 250608
Royal
Arsenal Regeneration project News 250608
Advanced Hygienic Cladding Advanced PVC wall Ceiling cladding products News
250608
BPT Security Systems (UK) Ltd Security and Surveillance Systems News 250608
Marshalls Street Furniture Street Furniture News 250608
Senior
Hargreaves Ventilation ductwork News 250608
Corus Steel producer
News 250608
Kawneer Curtain Wall Systems Door systems News 250608
Archtechnik Architectural metalwork Balconies Balustrades News 250608
Norfolk Frames British GRP doors PVC-U windows News 250608
Miller Construction Housebuilding Property development Construction businesses
News 260608
2008 WOOD
AWARDS Awards Ceremony News 260608
Purcell Miller Tritton Architect and historic building consultant News 260608
Chartered Institute of Building Building Control and Standards News 260608
Allison Pike Partnership Architectural and interior design practice News
260608
Aspire Defence Construction and facilities management company News 260608
Levolux
Solar Shading External Louvres News 260608
St Ethelburga’s Centre for Reconciliation & Peace Independent charity News
260608
Stormsaver Rainwater harvesting solutions News 260608
Liberon Wood products
News 260608
Aico Ltd Smoke
Detectors News 260608
ISG Construction Services Specialists New Builds News 270608
Kalzip Aluminium roof Wall cladding systems News 270608
Stroma Technology Governing accreditation body for commercial and domestic
energy News 270608
Cupa
Natural Slate Natural roofing slate News 270608
Saint-Gobain Isover Glass Mineral Wool Insulation News 270608
PRI
Measurement control and protection News 270608
Natural Building Technologies Sustainable building systems News 270608
The Yorkshire Agricultural Society Farming industry and rural life charity News
270608
Redland Concrete and clay tiles Slates News 270608
ISG Jackson Construction Services Specialists New Builds News 270608-2
Rockwool Stone
wool insulation News 270608
ARDEX UK Screeds Renders Ceramic Adhesives Grouts News 270608
One
NorthEast Regional development agency News 270608
Arundel Jones Associates LLP Registered in England and Wales No.
OC330189
Hill Farm, Linton Hill, Maidstone, Kent ME 17 4AL
Tel : 01622 745333
email
copyright all rights reserved
News Categories : BMS Motor Control Centres
Digital Facilities Management
Boilers Packaged
Chillers Air Water Cooled
Dry Coolers and Cooling Towers
Invertor Drives Controls Motors
Pumps Pump Systems
Valves Pipework Systems
Variable Speed Drives
|
BMS
Motor Control Centres Digital Facilities Management 
