3M - New Insulation Bonding Adhesive From 3M Offers Increased
Speed & Efficiency To Roofers
 Diversified technology company 3M has launched a new insulation bonding adhesive
which offers the construction markets a superior bonding method specifically
designed to fix insulation boards to a variety of substrates in both new-build
and refurbishment applications.
3M CR-20 Polyurethane Insulation Bonding Adhesive is a low-rise, two-component
polyurethane adhesive offering outstanding adhesive properties in addition to
controlled gap fill, without the risk of lifting insulation boards. Each of the
two components is dispensed from its own pressurised disposable canister,
utilising 3M’s two-component trigger-operated disposable foam applicator, making
it clean, quick and easy to dispense. The two components are only mixed by the
mixing nozzle at the end of the equipment, eliminating curing and blockages in
the hose and canisters.
Jane Holliday of 3M Corrosion Protection Products division commented: “This
innovative new product makes insulation attachment easy. It is reliable, strong,
clean, highly portable, quick and easy to apply, and is ideal for bonding
insulation boards to roof decks, eliminating the need for drilling or mechanical
fixing. Roofers appreciate how quickly and efficiently a CR-20 roof is installed
and, with each kit designed to bond 20m², the changeover rate is minimal. Also,
at a bonding rate of 40m² per hour, it is very fast.
“Additionally, as it is supplied in a self-contained dispensing kit, there are
no capital investment or maintenance costs.”
3M CR-20 Polyurethane Insulation Bonding Adhesive is ideal for bonding a wide
variety of substrates including structural concrete, 22 gauge steel decking,
cementitious wood fibre, plywood and OSB decks, lightweight concrete decks, and
poured gypsum decks. It has been approved to be used with an extensive
assortment of insulation and cover boards and will adhere insulation board to
insulation board where multiple layers are required. The adhesive will not run
or drip as it is applied in a bead form directly to the substrate. The
insulation board is placed onto the adhesive and a chemical cure takes place
several minutes after application, depending on temperature and weather
conditions.
For further information on 3M products for the construction market please email
below:
Ancon Stainless steel fixings Wall ties Ancon wall ties News 220811
Catnic Catnic lintels Steel lintels Window lintels Plaster beads
News 230811
Cembrit Roof tiles Slate tiles Roof slates External cladding News
240811
Cooper Lighting Recessed lighting Lighting controls Track lighting
Sign lighting News 240811
Crown Paints Crown paint Trade paint Crown trade Sadolin woodstain
News 260811
Crown Paints Crown paint Trade paint Gloss paint Matt paint News
230811
Dimplex Electric heating Electric heaters Electric fires Electric
stoves News 220811
Dimplex Heat pumps Ground source heat pumps Air curtains News 250811
Dorma Door closers Door hardware Automatic doors Door controls News
220811
Dulux Trade Dulux paint Trade paint Dulux trade Gloss paint News
220811
Eaton-Williams Data centre cooling Data centre services Air handling
News 250811
ENER-G Heat pumps BEMS systems CHP systems Heating systems News
250811
Flakt Woods Air handling Smoke dampers Fire detection Fire dampers
News 240811
Flowcrete Resin flooring Commercial flooring Industrial flooring
Flooring systems News 240811
Glidden Trade Glidden paint Glidden trade Trade paint External paint
News 240811
ICI Paints Dulux paint ICI paint Sikkens woodstain Trade paint News
250811
Kawneer Curtain walling Aluminium systems Door systems Solar shading
News 240811
Kingspan Flooring systems Access flooring Raised floors Suspended
floors News 220811
Knauf AMF Suspended ceilings Acoustic ceilings Office ceilings
Commercial ceilings News 220811
Krannich Solar Solar energy Solar panels Photovoltaic systems PV
systems News 220811
Laidlaw Door hardware Metal railings Metal balustrades Metal gates
News 230811
Laidlaw Door hardware Timber doorsets Architectural ironmongery
Steel doorsets News 240811
Lakesmere Building envelope Roof systems Rainscreen systems Flat
roofs News 250811
Lodgico Log cabins Log houses Log homes Timber buildings News 240811
Marshall-Tufflex Energy monitors Cable management Electrical cable
Data services News 230811
Mitsubishi Electric Air source heat pumps Heat pumps Air curtains
News 260811
Monodraught Natural ventilation systems Natural daylight systems Sun
pipes News 250811
Neptunus Temporary structures Temporary buildings Modular buildings
Modular structures News 260811
Powerwall Modular building systems Building materials External
insulation systems News 220811
Prysmian Electric cables Power cables Power distribution Power
transmission News 260811
Raychem Under floor heating Underfloor heating systems Underfloor
heating News 230811
S and P Coil Products Radiant heating Air curtains Radiant panels
Fan convectors News 240811
Sika Sarnafil ingle ply roofing systems Roof membrane Roofing
materials News 220811
Terasaki Circuit breakers Energy management LV switchgear
Distribution equipment News 240811
Tile Depot Wall tiles Floor tiles Ceramic tiles Tile go News 240811
Trend Air conditioning units Air conditioning systems Air
conditioning News 240811
TROX UK Chilled beams Ventilation systems IT cooling Fan coils News
220811
Tudor Roof tiles Handmade roof tiles Clay roof tiles News 250811
Windhager Biomass boilers Biomass stoves Biomass heating Heating
systems News 220811
News Categories:
Insulation bonding Insulation adhesive Roof adhesive Roofing
materials
Arundel Jones Associates Ltd
Hill Farm
Business Park, Linton Hill, Maidstone, Kent ME17 4AL
Tel : 01622 745333
news@buildingdesign.co.uk
See also:
| BuildingDesign Directory
|
BuildingDesign Tenders |
|BuildingDesign News Archives
| 2006 |
2007 |
2008 |
2009
|
BuildingDesign Recruitment |
AJA Part Time Jobs Board
|
© 2010 copyright all rights reserved
Registered in England and Wales No. 07334149
|
