- BuildingDesign News - Construction / Services News Archives
Door Controls - Door Automation - Energy Management - Building Automation
Carlo Gavazzi has launched the WSM wireless safety system
for use with safety edges on large industrial doors,
eliminating easily-damaged spiral cables between the door
controller and door. Using an operating frequency of 2.4Ghz
to prevent common radio interference, the system is
compatible with a wide range of safety edges and delivers
enhanced battery efficiency for a reliable and safe solution
in applications such as high speed doors with frequent
traffic, tall doors, megadoors and doors in public areas.
Delivering a 10 metre range for use in doors with opening
heights up to 20 metres, each system comprises a main
controller that connects to the door control panel and up to
four wireless sub controllers that connect to the safety
edge on the door. The IP66 rated system is suited for
internal and external locations and will work with the Carlo
Gavazzi photoelectric safety edge and many mechanical and
conductive rubber safety edges.
The WSM2BA2D24 main controller with built in antenna
features three SPST relay outputs; one normally closed (NC),
one normally open (NO) 8.2kohms, and one normally closed for
low battery alarm. A test input ensures verification of the
sensor safety function and is also used for activating sub
modules from battery save mode. Any loss of communication
between the main and sub controller modules will immediately
activate the safety output. 16 channels are available to
eliminate cross talk and the sub controller’s active time
can be set from 10 to 80 seconds.
The WSS2BA2BAT sub controller unit is able to handle two
safety edges and one door-in-door limit switch, which allows
for eight safety edges per system. It can control inputs
from all standard NO 8.2kohms safety edges and all standard
NC safety edges. Designed for exceptional battery
performance, the sub controller is powered by a choice of
one to four lithium AA batteries, with a minimum of one year
life for one set of sensors.
The Carlo Gavazzi photoelectric safety edge consists of an
emitter and receiver housed in 11mm rubber profiles.
Providing a range of 15 metres and powered by the sub
controller, the photoelectric beam is adjusted at each wake
up signal from the main controller to ensure optimal
detection performance.