Continental Underfloor Heating Underfloor Heating Electric Underfloor Heating news 270606

Subscribe to newsletter

Editor's Note: Continental Underfloor Heating
provide:-

Underfloor Heating
Electric Underfloor Heating

Request Information

Home
Include Article
Advertise

Links
Request Information
Terms of use
Contact

Request Facilities / Interiors product information

Request Architectural product information A-J

Request Architectural product information K-Z

Request Mechanical HVAC product information

Request Electrical product information

Continental Underfloor Heating

SlimFix Launch To Speed Up UFH Installations

The launch of a revolutionary, slim-line fitting system is set to save time and money on underfloor heating (UFH) installations. Continental Underfloor Heating’s new SlimFix system enables UFH to be fitted in just one inch (25mm) of floor space and takes 50% less time to fit.

SlimFix is aimed primarily at the ‘retro fit’ market which has been somewhat limited to date as traditionally, UFH raises floor heights by 75mm or more.
Commenting on the launch of SlimFix, Chris Ingram, Managing Director of Continental Underfloor Heating said: “SlimFix offers an easy-to-fit and cost-effective solution for fitting underfloor heating systems into refurbishment projects in just one inch of floor space and for speeding up installation into joisted first floors.”

The result of 18 months’ intensive development and testing by Continental’s R & D team, SlimFix™ comprises a highly flexible, thick foil through which UFH pipe brackets can be fitted. Its effectiveness has been tested thoroughly by the BSRIA and the system has been trialled on-site in a variety of projects around the UK.

SlimFix™ is now available in two versions – SlimFix™ Slab and SlimFix™ Joist – which have been shown to overcome key issues faced by underfloor heating installers.

Refurbishment
For existing properties undergoing refurbishment, traditional screed methods create a large increase in floor height (typically up to 150mm). This means costly and time-consuming changes are needed to fittings, such as door heights, kitchen cabinets and skirting boards, which can often mean the loss of a contract.

The new SlimFix™ Slab system minimises the need for such changes as it adds just 25mm to the floor height and can be fitted over an existing screed, slab or wood floor.

Joisted first floors
When it comes to fitting UFH to joisted first floors, traditional methods rely upon using expensive channelled insulation with aluminium spreader plates or require the addition of a sand-cement dry mix which can be a weight issue, particularly for timber frame homes. These methods are also time-consuming, resulting in high installation costs.

The SlimFix™ Joist system simply rolls out across and between the joists, prior to fitting pipe brackets into which the pipes are clipped. The simplicity of the system results in much quicker installations.

Chris Ingram, continued: “We believe in testing products thoroughly before we launch them. Prior to site testing we thought we had a ground breaking system in SlimFix™ but the feedback from installers involved in the testing exceeded our expectations. They said fitting time was reduced by 50% and, in one case, a whole first floor was fitted in three hours.”

One of the installers involved in the testing, Martin Allbrush of MA Construction, says: “SlimFix has allowed me to offer options to customers who were previously unable to benefit from UFH. Continental has spent a lot of time developing this system to ensure its suitability and I am now offering it to most of my customers.”

SlimFix™ is suitable for use with the entire Continental range, including the popular FlowMaster™, AluPEX and AluPERT tubing and the cost effective FlowMaster™ PEX pipe. Continental’s components and systems are manufactured and designed in accordance with all European and UK standards, including ISO9001 and DIN4726.

Email: info@continental-ufh.co.uk