- BuildingDesign News - Construction / Services News Archives

Article Date: 12th October 2017

DMS - UNICOcoder Single Jet Water Meters

Water Meters - Unicocoder Meters - Heat Meters - Gas Meters

DMS UNICOcoder Single Jet Water Meters

The UNICOcoder Water Meters manufactured by GWF in Switzerland are a compact Meter range for 15mm and 20mm connection sizes that have a built in M-Bus output. The M-Bus output is driven by the GWFcoder®-system to read the mechanical index precisely and accurately. This M-Bus output manifests itself as either a standard wired connection or it can be supplied with an RCM transmitter that provides a Wireless M-Bus interface. The RCM transmitter can either be mounted on the Meter head itself as a compact design or as a split unit so that the transmitter can be placed in a position with higher signal strength.

There are two versions of the Meter body to cover the requirements for both hot and cold water systems. The cold model can handle temperatures up to 50°C and the hot model is rated up temperatures up to 90°C. All models are WRAS and MID Approved allowing them to be used on all potable water supplies and also in conjunction with billing applications.

Unions are included in the cost of every Meter with a BSP Male thread connection and gaskets. The UNICOcoder Meters can be mounted in either horizontal or vertical runs of pipework thanks to the Single Jet measuring principle that it uses. The fact that they are Single Jet Water Meters also means that the minimum flow rates for these Meters are extremely tolerant.

BuildingDesign Media © - BuildingDesign Directory | BuildingDesign Tenders | BuildingDesign Recruitment